diff --git a/part5_i2c_com/lab1_i2c_tools/CMakeLists.txt b/part5_i2c_com/lab1_i2c_tools/CMakeLists.txt new file mode 100644 index 0000000..91d513e --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/CMakeLists.txt @@ -0,0 +1,8 @@ +# The following lines of boilerplate have to be in your project's CMakeLists +# in this exact order for cmake to work correctly +cmake_minimum_required(VERSION 3.5) + +set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/system/console/advanced/components) + +include($ENV{IDF_PATH}/tools/cmake/project.cmake) +project(i2c_tools) diff --git a/part5_i2c_com/lab1_i2c_tools/Makefile b/part5_i2c_com/lab1_i2c_tools/Makefile new file mode 100644 index 0000000..e2b60b6 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/Makefile @@ -0,0 +1,10 @@ +# +# This is a project Makefile. It is assumed the directory this Makefile resides in is a +# project subdirectory. +# + +PROJECT_NAME := i2c_tools + +EXTRA_COMPONENT_DIRS = $(IDF_PATH)/examples/system/console/advanced/components + +include $(IDF_PATH)/make/project.mk diff --git a/part5_i2c_com/lab1_i2c_tools/README.md b/part5_i2c_com/lab1_i2c_tools/README.md new file mode 100644 index 0000000..71176ac --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/README.md @@ -0,0 +1,204 @@ +# I2C Tools Example + +(See the README.md file in the upper level 'examples' directory for more information about examples.) + +## Overview + +[I2C Tools](https://i2c.wiki.kernel.org/index.php/I2C_Tools) is a simple but very useful tool for developing I2C related applications, which is also famous in Linux platform. This example just implements some of basic features of [I2C Tools](https://i2c.wiki.kernel.org/index.php/I2C_Tools) based on [esp32 console component](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/console.html). As follows, this example supports five command-line tools: + +1. `i2cconfig`: It will configure the I2C bus with specific GPIO number, port number and frequency. +2. `i2cdetect`: It will scan an I2C bus for devices and output a table with the list of detected devices on the bus. +3. `i2cget`: It will read registers visible through the I2C bus. +4. `i2cset`: It will set registers visible through the I2C bus. +5. `i2cdump`: It will examine registers visible through the I2C bus. + +If you have some trouble in developing I2C related applications, or just want to test some functions of one I2C device, you can play with this example first. + +## How to use example + +### Hardware Required + +To run this example, you should have any ESP32, ESP32-S and ESP32-C based development board. For test purpose, you should have a kind of device with I2C interface as well. Here we will take the CCS811 sensor as an example to show how to test the function of this sensor without writing any code (just use the command-line tools supported by this example). For more information about CCS811, you can consult the [online datasheet](http://ams.com/ccs811). + +#### Pin Assignment: + +**Note:** The following pin assignments are used by default, you can change them with `i2cconfig` command at any time. + +| | SDA | SCL | GND | Other | VCC | +| ------------------- | ------ | ------ | ---- | ----- | ---- | +| ESP32 I2C Master | GPIO18 | GPIO19 | GND | GND | 3.3V | +| ESP32-S2 I2C Master | GPIO18 | GPIO19 | GND | GND | 3.3V | +| ESP32-S3 I2C Master | GPIO1 | GPIO2 | GND | GND | 3.3V | +| ESP32-C3 I2C Master | GPIO5 | GPIO6 | GND | GND | 3.3V | +| Sensor | SDA | SCL | GND | WAK | VCC | + +**Note: ** There’s no need to add an external pull-up resistors for SDA/SCL pin, because the driver will enable the internal pull-up resistors itself. + +### Configure the project + +Open the project configuration menu (`idf.py menuconfig`). Then go into `Example Configuration` menu. + +- You can choose whether or not to save command history into flash in `Store command history in flash` option. + +### Build and Flash + +Run `idf.py -p PORT flash monitor` to build and flash the project.. + +(To exit the serial monitor, type ``Ctrl-]``.) + +See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects. + +## Example Output + +### Check all supported commands and their usages + +```bash + ============================================================== + | Steps to Use i2c-tools on ESP32 | + | | + | 1. Try 'help', check all supported commands | + | 2. Try 'i2cconfig' to configure your I2C bus | + | 3. Try 'i2cdetect' to scan devices on the bus | + | 4. Try 'i2cget' to get the content of specific register | + | 5. Try 'i2cset' to set the value of specific register | + | 6. Try 'i2cdump' to dump all the register (Experiment) | + | | + ============================================================== + +i2c-tools> help +help + Print the list of registered commands + +i2cconfig [--port=<0|1>] [--freq=] --sda= --scl= + Config I2C bus + --port=<0|1> Set the I2C bus port number + --freq= Set the frequency(Hz) of I2C bus + --sda= Set the gpio for I2C SDA + --scl= Set the gpio for I2C SCL + +i2cdetect + Scan I2C bus for devices + +i2cget -c [-r ] [-l ] + Read registers visible through the I2C bus + -c, --chip= Specify the address of the chip on that bus + -r, --register= Specify the address on that chip to read from + -l, --length= Specify the length to read from that data address + +i2cset -c [-r ] []... + Set registers visible through the I2C bus + -c, --chip= Specify the address of the chip on that bus + -r, --register= Specify the address on that chip to read from + Specify the data to write to that data address + +i2cdump -c [-s ] + Examine registers visible through the I2C bus + -c, --chip= Specify the address of the chip on that bus + -s, --size= Specify the size of each read + +free + Get the current size of free heap memory + +heap + Get minimum size of free heap memory that was available during program execu + tion + +version + Get version of chip and SDK + +restart + Software reset of the chip + +deep_sleep [-t ] [--io=] [--io_level=<0|1>] + Enter deep sleep mode. Two wakeup modes are supported: timer and GPIO. If no + wakeup option is specified, will sleep indefinitely. + -t, --time= Wake up time, ms + --io= If specified, wakeup using GPIO with given number + --io_level=<0|1> GPIO level to trigger wakeup + +light_sleep [-t ] [--io=]... [--io_level=<0|1>]... + Enter light sleep mode. Two wakeup modes are supported: timer and GPIO. Mult + iple GPIO pins can be specified using pairs of 'io' and 'io_level' arguments + . Will also wake up on UART input. + -t, --time= Wake up time, ms + --io= If specified, wakeup using GPIO with given number + --io_level=<0|1> GPIO level to trigger wakeup + +tasks + Get information about running tasks +``` + +### Configure the I2C bus + +```bash +esp32> i2cconfig --port=0 --sda=18 --scl=19 --freq=100000 +``` + +* `--port` option to specify the port of I2C, here we choose port 0 for test. +* `--sda` and `--scl` options to specify the gpio number used by I2C bus, here we choose GPIO18 as the SDA and GPIO19 as the SCL. +* `--freq` option to specify the frequency of I2C bus, here we set to 100KHz. + +### Check the I2C address (7 bits) on the I2C bus + +```bash +esp32> i2cdetect + 0 1 2 3 4 5 6 7 8 9 a b c d e f +00: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +50: -- -- -- -- -- -- -- -- -- -- -- 5b -- -- -- -- +60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +70: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- +``` + +* Here we found the address of CCS811 is 0x5b. + +### Get the value of status register + +```bash +esp32> i2cget -c 0x5b -r 0x00 -l 1 +0x10 +``` + +* `-c` option to specify the address of I2C device (acquired from `i2cdetect` command). +* `-r` option to specify the register address you want to inspect. +* `-l` option to specify the length of the content. +* Here the returned value 0x10 means that the sensor is just in the boot mode and is ready to go into application mode. For more information about CCS811 you should consult the [official website](http://ams.com/ccs811). + +### Change the working mode + +```bash +esp32> i2cset -c 0x5b -r 0xF4 +I (734717) cmd_i2ctools: Write OK +esp32> i2cset -c 0x5b -r 0x01 0x10 +I (1072047) cmd_i2ctools: Write OK +esp32> i2cget -c 0x5b -r 0x00 -l 1 +0x98 +``` + +* Here we change the mode from boot to application and set a proper measure mode (by writing 0x10 to register 0x01) +* Now the status value of the sensor is 0x98, which means a valid data is ready to read + +### Read the sensor data + +```bash +esp32> i2cget -c 0x5b -r 0x02 -l 8 +0x01 0xb0 0x00 0x04 0x98 0x00 0x19 0x8f +``` + +* The register 0x02 will output 8 bytes result, mainly including value of eCO~2~、TVOC and there raw value. So the value of eCO~2~ is 0x01b0 ppm and value of TVOC is 0x04 ppb. + +## Troubleshooting + +* I don’t find any available address when running `i2cdetect` command. + * Make sure your wiring connection is right. + * Some sensor will have a “wake up” pin, via which user can put the sensor into a sleep mode. So make sure your sensor in **not** in the sleep state. + * Reset you I2C device, and then run `i2cdetect` again. +* I can’t get the right content when running `i2cdump` command. + * Currently the `i2cdump` only support those who have the same content length of registers inside the I2C device. For example, if a device have three register addresses, and the content length at these address are 1 byte, 2 bytes and 4 bytes. In this case you should not expect this command to dump the register correctly. + + +(For any technical queries, please open an [issue](https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you as soon as possible.) + diff --git a/part5_i2c_com/lab1_i2c_tools/example_test.py b/part5_i2c_com/lab1_i2c_tools/example_test.py new file mode 100644 index 0000000..67d48b4 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/example_test.py @@ -0,0 +1,37 @@ +from __future__ import print_function + +import ttfw_idf + +EXPECT_TIMEOUT = 20 + + +@ttfw_idf.idf_example_test(env_tag='Example_I2C_CCS811_SENSOR') +def test_i2ctools_example(env, extra_data): + # Get device under test, flash and start example. "i2ctool" must be defined in EnvConfig + dut = env.get_dut('i2ctools', 'examples/peripherals/i2c/i2c_tools', dut_class=ttfw_idf.ESP32DUT) + dut.start_app() + dut.expect('i2c-tools>', timeout=EXPECT_TIMEOUT) + # Get i2c address + dut.write('i2cdetect') + dut.expect('5b', timeout=EXPECT_TIMEOUT) + # Get chip ID + dut.write('i2cget -c 0x5b -r 0x20 -l 1') + dut.expect('0x81', timeout=EXPECT_TIMEOUT) + # Reset sensor + dut.write('i2cset -c 0x5b -r 0xFF 0x11 0xE5 0x72 0x8A') + dut.expect('OK', timeout=EXPECT_TIMEOUT) + # Get status + dut.write('i2cget -c 0x5b -r 0x00 -l 1') + dut.expect_any('0x10', timeout=EXPECT_TIMEOUT) + # Change work mode + dut.write('i2cset -c 0x5b -r 0xF4') + dut.expect('OK', timeout=EXPECT_TIMEOUT) + dut.write('i2cset -c 0x5b -r 0x01 0x10') + dut.expect('OK', timeout=EXPECT_TIMEOUT) + # Get new status + dut.write('i2cget -c 0x5b -r 0x00 -l 1') + dut.expect_any('0x98', '0x90', timeout=EXPECT_TIMEOUT) + + +if __name__ == '__main__': + test_i2ctools_example() diff --git a/part5_i2c_com/lab1_i2c_tools/main/CMakeLists.txt b/part5_i2c_com/lab1_i2c_tools/main/CMakeLists.txt new file mode 100644 index 0000000..7af0d47 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/CMakeLists.txt @@ -0,0 +1,3 @@ +idf_component_register(SRCS "i2ctools_example_main.c" + "cmd_i2ctools.c" + INCLUDE_DIRS ".") diff --git a/part5_i2c_com/lab1_i2c_tools/main/Kconfig.projbuild b/part5_i2c_com/lab1_i2c_tools/main/Kconfig.projbuild new file mode 100644 index 0000000..83d85ce --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/Kconfig.projbuild @@ -0,0 +1,10 @@ +menu "Example Configuration" + + config EXAMPLE_STORE_HISTORY + bool "Store command history in flash" + default y + help + Linenoise line editing library provides functions to save and load + command history. If this option is enabled, initalizes a FAT filesystem + and uses it to store command history. +endmenu diff --git a/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.c b/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.c new file mode 100644 index 0000000..75b80b5 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.c @@ -0,0 +1,409 @@ +/* cmd_i2ctools.c + + This example code is in the Public Domain (or CC0 licensed, at your option.) + + Unless required by applicable law or agreed to in writing, this + software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. +*/ +#include +#include "argtable3/argtable3.h" +#include "driver/i2c.h" +#include "esp_console.h" +#include "esp_log.h" + +#define I2C_MASTER_TX_BUF_DISABLE 0 /*!< I2C master doesn't need buffer */ +#define I2C_MASTER_RX_BUF_DISABLE 0 /*!< I2C master doesn't need buffer */ +#define WRITE_BIT I2C_MASTER_WRITE /*!< I2C master write */ +#define READ_BIT I2C_MASTER_READ /*!< I2C master read */ +#define ACK_CHECK_EN 0x1 /*!< I2C master will check ack from slave*/ +#define ACK_CHECK_DIS 0x0 /*!< I2C master will not check ack from slave */ +#define ACK_VAL 0x0 /*!< I2C ack value */ +#define NACK_VAL 0x1 /*!< I2C nack value */ + +static const char *TAG = "cmd_i2ctools"; + +#if CONFIG_IDF_TARGET_ESP32S3 +static gpio_num_t i2c_gpio_sda = 1; +static gpio_num_t i2c_gpio_scl = 2; +#elif CONFIG_IDF_TARGET_ESP32C3 +static gpio_num_t i2c_gpio_sda = 5; +static gpio_num_t i2c_gpio_scl = 6; +#else +static gpio_num_t i2c_gpio_sda = 18; +static gpio_num_t i2c_gpio_scl = 19; +#endif + +static uint32_t i2c_frequency = 100000; +static i2c_port_t i2c_port = I2C_NUM_0; + +static esp_err_t i2c_get_port(int port, i2c_port_t *i2c_port) +{ + if (port >= I2C_NUM_MAX) { + ESP_LOGE(TAG, "Wrong port number: %d", port); + return ESP_FAIL; + } + *i2c_port = port; + return ESP_OK; +} + +static esp_err_t i2c_master_driver_initialize(void) +{ + i2c_config_t conf = { + .mode = I2C_MODE_MASTER, + .sda_io_num = i2c_gpio_sda, + .sda_pullup_en = GPIO_PULLUP_ENABLE, + .scl_io_num = i2c_gpio_scl, + .scl_pullup_en = GPIO_PULLUP_ENABLE, + .master.clk_speed = i2c_frequency, + // .clk_flags = 0, /*!< Optional, you can use I2C_SCLK_SRC_FLAG_* flags to choose i2c source clock here. */ + }; + return i2c_param_config(i2c_port, &conf); +} + +static struct { + struct arg_int *port; + struct arg_int *freq; + struct arg_int *sda; + struct arg_int *scl; + struct arg_end *end; +} i2cconfig_args; + +static int do_i2cconfig_cmd(int argc, char **argv) +{ + int nerrors = arg_parse(argc, argv, (void **)&i2cconfig_args); + if (nerrors != 0) { + arg_print_errors(stderr, i2cconfig_args.end, argv[0]); + return 0; + } + + /* Check "--port" option */ + if (i2cconfig_args.port->count) { + if (i2c_get_port(i2cconfig_args.port->ival[0], &i2c_port) != ESP_OK) { + return 1; + } + } + /* Check "--freq" option */ + if (i2cconfig_args.freq->count) { + i2c_frequency = i2cconfig_args.freq->ival[0]; + } + /* Check "--sda" option */ + i2c_gpio_sda = i2cconfig_args.sda->ival[0]; + /* Check "--scl" option */ + i2c_gpio_scl = i2cconfig_args.scl->ival[0]; + return 0; +} + +static void register_i2cconfig(void) +{ + i2cconfig_args.port = arg_int0(NULL, "port", "<0|1>", "Set the I2C bus port number"); + i2cconfig_args.freq = arg_int0(NULL, "freq", "", "Set the frequency(Hz) of I2C bus"); + i2cconfig_args.sda = arg_int1(NULL, "sda", "", "Set the gpio for I2C SDA"); + i2cconfig_args.scl = arg_int1(NULL, "scl", "", "Set the gpio for I2C SCL"); + i2cconfig_args.end = arg_end(2); + const esp_console_cmd_t i2cconfig_cmd = { + .command = "i2cconfig", + .help = "Config I2C bus", + .hint = NULL, + .func = &do_i2cconfig_cmd, + .argtable = &i2cconfig_args + }; + ESP_ERROR_CHECK(esp_console_cmd_register(&i2cconfig_cmd)); +} + +static int do_i2cdetect_cmd(int argc, char **argv) +{ + i2c_driver_install(i2c_port, I2C_MODE_MASTER, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0); + i2c_master_driver_initialize(); + uint8_t address; + printf(" 0 1 2 3 4 5 6 7 8 9 a b c d e f\r\n"); + for (int i = 0; i < 128; i += 16) { + printf("%02x: ", i); + for (int j = 0; j < 16; j++) { + fflush(stdout); + address = i + j; + i2c_cmd_handle_t cmd = i2c_cmd_link_create(); + i2c_master_start(cmd); + i2c_master_write_byte(cmd, (address << 1) | WRITE_BIT, ACK_CHECK_EN); + i2c_master_stop(cmd); + esp_err_t ret = i2c_master_cmd_begin(i2c_port, cmd, 50 / portTICK_RATE_MS); + i2c_cmd_link_delete(cmd); + if (ret == ESP_OK) { + printf("%02x ", address); + } else if (ret == ESP_ERR_TIMEOUT) { + printf("UU "); + } else { + printf("-- "); + } + } + printf("\r\n"); + } + + i2c_driver_delete(i2c_port); + return 0; +} + +static void register_i2cdectect(void) +{ + const esp_console_cmd_t i2cdetect_cmd = { + .command = "i2cdetect", + .help = "Scan I2C bus for devices", + .hint = NULL, + .func = &do_i2cdetect_cmd, + .argtable = NULL + }; + ESP_ERROR_CHECK(esp_console_cmd_register(&i2cdetect_cmd)); +} + +static struct { + struct arg_int *chip_address; + struct arg_int *register_address; + struct arg_int *data_length; + struct arg_end *end; +} i2cget_args; + +static int do_i2cget_cmd(int argc, char **argv) +{ + int nerrors = arg_parse(argc, argv, (void **)&i2cget_args); + if (nerrors != 0) { + arg_print_errors(stderr, i2cget_args.end, argv[0]); + return 0; + } + + /* Check chip address: "-c" option */ + int chip_addr = i2cget_args.chip_address->ival[0]; + /* Check register address: "-r" option */ + int data_addr = -1; + if (i2cget_args.register_address->count) { + data_addr = i2cget_args.register_address->ival[0]; + } + /* Check data length: "-l" option */ + int len = 1; + if (i2cget_args.data_length->count) { + len = i2cget_args.data_length->ival[0]; + } + uint8_t *data = malloc(len); + + i2c_driver_install(i2c_port, I2C_MODE_MASTER, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0); + i2c_master_driver_initialize(); + i2c_cmd_handle_t cmd = i2c_cmd_link_create(); + i2c_master_start(cmd); + if (data_addr != -1) { + i2c_master_write_byte(cmd, chip_addr << 1 | WRITE_BIT, ACK_CHECK_EN); + i2c_master_write_byte(cmd, data_addr, ACK_CHECK_EN); + i2c_master_start(cmd); + } + i2c_master_write_byte(cmd, chip_addr << 1 | READ_BIT, ACK_CHECK_EN); + if (len > 1) { + i2c_master_read(cmd, data, len - 1, ACK_VAL); + } + i2c_master_read_byte(cmd, data + len - 1, NACK_VAL); + i2c_master_stop(cmd); + esp_err_t ret = i2c_master_cmd_begin(i2c_port, cmd, 1000 / portTICK_RATE_MS); + i2c_cmd_link_delete(cmd); + if (ret == ESP_OK) { + for (int i = 0; i < len; i++) { + printf("0x%02x ", data[i]); + if ((i + 1) % 16 == 0) { + printf("\r\n"); + } + } + if (len % 16) { + printf("\r\n"); + } + } else if (ret == ESP_ERR_TIMEOUT) { + ESP_LOGW(TAG, "Bus is busy"); + } else { + ESP_LOGW(TAG, "Read failed"); + } + free(data); + i2c_driver_delete(i2c_port); + return 0; +} + +static void register_i2cget(void) +{ + i2cget_args.chip_address = arg_int1("c", "chip", "", "Specify the address of the chip on that bus"); + i2cget_args.register_address = arg_int0("r", "register", "", "Specify the address on that chip to read from"); + i2cget_args.data_length = arg_int0("l", "length", "", "Specify the length to read from that data address"); + i2cget_args.end = arg_end(1); + const esp_console_cmd_t i2cget_cmd = { + .command = "i2cget", + .help = "Read registers visible through the I2C bus", + .hint = NULL, + .func = &do_i2cget_cmd, + .argtable = &i2cget_args + }; + ESP_ERROR_CHECK(esp_console_cmd_register(&i2cget_cmd)); +} + +static struct { + struct arg_int *chip_address; + struct arg_int *register_address; + struct arg_int *data; + struct arg_end *end; +} i2cset_args; + +static int do_i2cset_cmd(int argc, char **argv) +{ + int nerrors = arg_parse(argc, argv, (void **)&i2cset_args); + if (nerrors != 0) { + arg_print_errors(stderr, i2cset_args.end, argv[0]); + return 0; + } + + /* Check chip address: "-c" option */ + int chip_addr = i2cset_args.chip_address->ival[0]; + /* Check register address: "-r" option */ + int data_addr = 0; + if (i2cset_args.register_address->count) { + data_addr = i2cset_args.register_address->ival[0]; + } + /* Check data: "-d" option */ + int len = i2cset_args.data->count; + + i2c_driver_install(i2c_port, I2C_MODE_MASTER, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0); + i2c_master_driver_initialize(); + i2c_cmd_handle_t cmd = i2c_cmd_link_create(); + i2c_master_start(cmd); + i2c_master_write_byte(cmd, chip_addr << 1 | WRITE_BIT, ACK_CHECK_EN); + if (i2cset_args.register_address->count) { + i2c_master_write_byte(cmd, data_addr, ACK_CHECK_EN); + } + for (int i = 0; i < len; i++) { + i2c_master_write_byte(cmd, i2cset_args.data->ival[i], ACK_CHECK_EN); + } + i2c_master_stop(cmd); + esp_err_t ret = i2c_master_cmd_begin(i2c_port, cmd, 1000 / portTICK_RATE_MS); + i2c_cmd_link_delete(cmd); + if (ret == ESP_OK) { + ESP_LOGI(TAG, "Write OK"); + } else if (ret == ESP_ERR_TIMEOUT) { + ESP_LOGW(TAG, "Bus is busy"); + } else { + ESP_LOGW(TAG, "Write Failed"); + } + i2c_driver_delete(i2c_port); + return 0; +} + +static void register_i2cset(void) +{ + i2cset_args.chip_address = arg_int1("c", "chip", "", "Specify the address of the chip on that bus"); + i2cset_args.register_address = arg_int0("r", "register", "", "Specify the address on that chip to read from"); + i2cset_args.data = arg_intn(NULL, NULL, "", 0, 256, "Specify the data to write to that data address"); + i2cset_args.end = arg_end(2); + const esp_console_cmd_t i2cset_cmd = { + .command = "i2cset", + .help = "Set registers visible through the I2C bus", + .hint = NULL, + .func = &do_i2cset_cmd, + .argtable = &i2cset_args + }; + ESP_ERROR_CHECK(esp_console_cmd_register(&i2cset_cmd)); +} + +static struct { + struct arg_int *chip_address; + struct arg_int *size; + struct arg_end *end; +} i2cdump_args; + +static int do_i2cdump_cmd(int argc, char **argv) +{ + int nerrors = arg_parse(argc, argv, (void **)&i2cdump_args); + if (nerrors != 0) { + arg_print_errors(stderr, i2cdump_args.end, argv[0]); + return 0; + } + + /* Check chip address: "-c" option */ + int chip_addr = i2cdump_args.chip_address->ival[0]; + /* Check read size: "-s" option */ + int size = 1; + if (i2cdump_args.size->count) { + size = i2cdump_args.size->ival[0]; + } + if (size != 1 && size != 2 && size != 4) { + ESP_LOGE(TAG, "Wrong read size. Only support 1,2,4"); + return 1; + } + i2c_driver_install(i2c_port, I2C_MODE_MASTER, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0); + i2c_master_driver_initialize(); + uint8_t data_addr; + uint8_t data[4]; + int32_t block[16]; + printf(" 0 1 2 3 4 5 6 7 8 9 a b c d e f" + " 0123456789abcdef\r\n"); + for (int i = 0; i < 128; i += 16) { + printf("%02x: ", i); + for (int j = 0; j < 16; j += size) { + fflush(stdout); + data_addr = i + j; + i2c_cmd_handle_t cmd = i2c_cmd_link_create(); + i2c_master_start(cmd); + i2c_master_write_byte(cmd, chip_addr << 1 | WRITE_BIT, ACK_CHECK_EN); + i2c_master_write_byte(cmd, data_addr, ACK_CHECK_EN); + i2c_master_start(cmd); + i2c_master_write_byte(cmd, chip_addr << 1 | READ_BIT, ACK_CHECK_EN); + if (size > 1) { + i2c_master_read(cmd, data, size - 1, ACK_VAL); + } + i2c_master_read_byte(cmd, data + size - 1, NACK_VAL); + i2c_master_stop(cmd); + esp_err_t ret = i2c_master_cmd_begin(i2c_port, cmd, 50 / portTICK_RATE_MS); + i2c_cmd_link_delete(cmd); + if (ret == ESP_OK) { + for (int k = 0; k < size; k++) { + printf("%02x ", data[k]); + block[j + k] = data[k]; + } + } else { + for (int k = 0; k < size; k++) { + printf("XX "); + block[j + k] = -1; + } + } + } + printf(" "); + for (int k = 0; k < 16; k++) { + if (block[k] < 0) { + printf("X"); + } + if ((block[k] & 0xff) == 0x00 || (block[k] & 0xff) == 0xff) { + printf("."); + } else if ((block[k] & 0xff) < 32 || (block[k] & 0xff) >= 127) { + printf("?"); + } else { + printf("%c", block[k] & 0xff); + } + } + printf("\r\n"); + } + i2c_driver_delete(i2c_port); + return 0; +} + +static void register_i2cdump(void) +{ + i2cdump_args.chip_address = arg_int1("c", "chip", "", "Specify the address of the chip on that bus"); + i2cdump_args.size = arg_int0("s", "size", "", "Specify the size of each read"); + i2cdump_args.end = arg_end(1); + const esp_console_cmd_t i2cdump_cmd = { + .command = "i2cdump", + .help = "Examine registers visible through the I2C bus", + .hint = NULL, + .func = &do_i2cdump_cmd, + .argtable = &i2cdump_args + }; + ESP_ERROR_CHECK(esp_console_cmd_register(&i2cdump_cmd)); +} + +void register_i2ctools(void) +{ + register_i2cconfig(); + register_i2cdectect(); + register_i2cget(); + register_i2cset(); + register_i2cdump(); +} diff --git a/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.h b/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.h new file mode 100644 index 0000000..2bd3953 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/cmd_i2ctools.h @@ -0,0 +1,20 @@ +/* cmd_i2ctools.h + + This example code is in the Public Domain (or CC0 licensed, at your option.) + + Unless required by applicable law or agreed to in writing, this + software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. +*/ + +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif + +void register_i2ctools(void); + +#ifdef __cplusplus +} +#endif diff --git a/part5_i2c_com/lab1_i2c_tools/main/component.mk b/part5_i2c_com/lab1_i2c_tools/main/component.mk new file mode 100644 index 0000000..44bd2b5 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/component.mk @@ -0,0 +1,3 @@ +# +# Main Makefile. This is basically the same as a component makefile. +# diff --git a/part5_i2c_com/lab1_i2c_tools/main/i2ctools_example_main.c b/part5_i2c_com/lab1_i2c_tools/main/i2ctools_example_main.c new file mode 100644 index 0000000..4e36321 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/main/i2ctools_example_main.c @@ -0,0 +1,81 @@ +/* i2c-tools example + + This example code is in the Public Domain (or CC0 licensed, at your option.) + + Unless required by applicable law or agreed to in writing, this + software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR + CONDITIONS OF ANY KIND, either express or implied. +*/ + +#include +#include +#include "sdkconfig.h" +#include "esp_log.h" +#include "esp_console.h" +#include "esp_vfs_fat.h" +#include "cmd_system.h" +#include "cmd_i2ctools.h" + +static const char *TAG = "i2c-tools"; + +#if CONFIG_EXAMPLE_STORE_HISTORY + +#define MOUNT_PATH "/data" +#define HISTORY_PATH MOUNT_PATH "/history.txt" + +static void initialize_filesystem(void) +{ + static wl_handle_t wl_handle; + const esp_vfs_fat_mount_config_t mount_config = { + .max_files = 4, + .format_if_mount_failed = true + }; + esp_err_t err = esp_vfs_fat_spiflash_mount(MOUNT_PATH, "storage", &mount_config, &wl_handle); + if (err != ESP_OK) { + ESP_LOGE(TAG, "Failed to mount FATFS (%s)", esp_err_to_name(err)); + return; + } +} +#endif // CONFIG_EXAMPLE_STORE_HISTORY + +void app_main(void) +{ + esp_console_repl_t *repl = NULL; + esp_console_repl_config_t repl_config = ESP_CONSOLE_REPL_CONFIG_DEFAULT(); + +#if CONFIG_EXAMPLE_STORE_HISTORY + initialize_filesystem(); + repl_config.history_save_path = HISTORY_PATH; +#endif + repl_config.prompt = "i2c-tools>"; + + // install console REPL environment +#if CONFIG_ESP_CONSOLE_UART + esp_console_dev_uart_config_t uart_config = ESP_CONSOLE_DEV_UART_CONFIG_DEFAULT(); + ESP_ERROR_CHECK(esp_console_new_repl_uart(&uart_config, &repl_config, &repl)); +#elif CONFIG_ESP_CONSOLE_USB_CDC + esp_console_dev_usb_cdc_config_t cdc_config = ESP_CONSOLE_DEV_CDC_CONFIG_DEFAULT(); + ESP_ERROR_CHECK(esp_console_new_repl_usb_cdc(&cdc_config, &repl_config, &repl)); +#elif CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG + esp_console_dev_usb_serial_jtag_config_t usbjtag_config = ESP_CONSOLE_DEV_USB_SERIAL_JTAG_CONFIG_DEFAULT(); + ESP_ERROR_CHECK(esp_console_new_repl_usb_serial_jtag(&usbjtag_config, &repl_config, &repl)); +#endif + + register_i2ctools(); + register_system(); + + printf("\n ==============================================================\n"); + printf(" | Steps to Use i2c-tools |\n"); + printf(" | |\n"); + printf(" | 1. Try 'help', check all supported commands |\n"); + printf(" | 2. Try 'i2cconfig' to configure your I2C bus |\n"); + printf(" | 3. Try 'i2cdetect' to scan devices on the bus |\n"); + printf(" | 4. Try 'i2cget' to get the content of specific register |\n"); + printf(" | 5. Try 'i2cset' to set the value of specific register |\n"); + printf(" | 6. Try 'i2cdump' to dump all the register (Experiment) |\n"); + printf(" | |\n"); + printf(" ==============================================================\n\n"); + + // start console REPL + ESP_ERROR_CHECK(esp_console_start_repl(repl)); +} diff --git a/part5_i2c_com/lab1_i2c_tools/partitions_example.csv b/part5_i2c_com/lab1_i2c_tools/partitions_example.csv new file mode 100644 index 0000000..1c79321 --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/partitions_example.csv @@ -0,0 +1,6 @@ +# Name, Type, SubType, Offset, Size, Flags +# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap +nvs, data, nvs, 0x9000, 0x6000, +phy_init, data, phy, 0xf000, 0x1000, +factory, app, factory, 0x10000, 1M, +storage, data, fat, , 1M, diff --git a/part5_i2c_com/lab1_i2c_tools/sdkconfig b/part5_i2c_com/lab1_i2c_tools/sdkconfig new file mode 100644 index 0000000..2d9da9b --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/sdkconfig @@ -0,0 +1,1394 @@ +# +# Automatically generated file. DO NOT EDIT. +# Espressif IoT Development Framework (ESP-IDF) Project Configuration +# +CONFIG_IDF_CMAKE=y +CONFIG_IDF_TARGET_ARCH_XTENSA=y +CONFIG_IDF_TARGET="esp32" +CONFIG_IDF_TARGET_ESP32=y +CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 + +# +# SDK tool configuration +# +CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-" +# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set +# end of SDK tool configuration + +# +# Build type +# +CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y +# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set +CONFIG_APP_BUILD_GENERATE_BINARIES=y +CONFIG_APP_BUILD_BOOTLOADER=y +CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# end of Build type + +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +# +# Bootloader config +# +CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 +CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set +CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y +# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set +CONFIG_BOOTLOADER_LOG_LEVEL=2 +# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set +CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y +# CONFIG_BOOTLOADER_FACTORY_RESET is not set +# CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_WDT_ENABLE=y +# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set +CONFIG_BOOTLOADER_WDT_TIME_MS=9000 +# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set +CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 +# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y +# end of Bootloader config + +# +# Security features +# +# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set +# CONFIG_SECURE_BOOT is not set +# CONFIG_SECURE_FLASH_ENC_ENABLED is not set +# end of Security features + +# +# Serial flasher config +# +CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 +# CONFIG_ESPTOOLPY_NO_STUB is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set +CONFIG_ESPTOOLPY_FLASHMODE_DIO=y +# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y +CONFIG_ESPTOOLPY_FLASHMODE="dio" +# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set +CONFIG_ESPTOOLPY_FLASHFREQ_40M=y +# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set +CONFIG_ESPTOOLPY_FLASHFREQ="40m" +# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y +# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE="4MB" +CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y +CONFIG_ESPTOOLPY_BEFORE_RESET=y +# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set +CONFIG_ESPTOOLPY_BEFORE="default_reset" +CONFIG_ESPTOOLPY_AFTER_RESET=y +# CONFIG_ESPTOOLPY_AFTER_NORESET is not set +CONFIG_ESPTOOLPY_AFTER="hard_reset" +# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set +CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y +# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set +# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set +CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200 +CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 +# end of Serial flasher config + +# +# Partition Table +# +# CONFIG_PARTITION_TABLE_SINGLE_APP is not set +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set +# CONFIG_PARTITION_TABLE_TWO_OTA is not set +CONFIG_PARTITION_TABLE_CUSTOM=y +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_example.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions_example.csv" +CONFIG_PARTITION_TABLE_OFFSET=0x8000 +CONFIG_PARTITION_TABLE_MD5=y +# end of Partition Table + +# +# Example Configuration +# +CONFIG_EXAMPLE_STORE_HISTORY=y +# end of Example Configuration + +# +# Compiler options +# +CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set +# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_COMPILER_OPTIMIZATION_NONE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y +# CONFIG_COMPILER_CXX_EXCEPTIONS is not set +# CONFIG_COMPILER_CXX_RTTI is not set +CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y +# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set +# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set +# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set +# end of Compiler options + +# +# Component config +# + +# +# Application Level Tracing +# +# CONFIG_APPTRACE_DEST_JTAG is not set +CONFIG_APPTRACE_DEST_NONE=y +CONFIG_APPTRACE_LOCK_ENABLE=y +# end of Application Level Tracing + +# +# ESP-ASIO +# +# CONFIG_ASIO_SSL_SUPPORT is not set +# end of ESP-ASIO + +# +# Bluetooth +# +# CONFIG_BT_ENABLED is not set +# end of Bluetooth + +# +# CoAP Configuration +# +CONFIG_COAP_MBEDTLS_PSK=y +# CONFIG_COAP_MBEDTLS_PKI is not set +# CONFIG_COAP_MBEDTLS_DEBUG is not set +CONFIG_COAP_LOG_DEFAULT_LEVEL=0 +# end of CoAP Configuration + +# +# Driver configurations +# + +# +# ADC configuration +# +# CONFIG_ADC_FORCE_XPD_FSM is not set +CONFIG_ADC_DISABLE_DAC=y +# end of ADC configuration + +# +# MCPWM configuration +# +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# end of MCPWM configuration + +# +# SPI configuration +# +# CONFIG_SPI_MASTER_IN_IRAM is not set +CONFIG_SPI_MASTER_ISR_IN_IRAM=y +# CONFIG_SPI_SLAVE_IN_IRAM is not set +CONFIG_SPI_SLAVE_ISR_IN_IRAM=y +# end of SPI configuration + +# +# TWAI configuration +# +# CONFIG_TWAI_ISR_IN_IRAM is not set +# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set +# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set +# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set +# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set +# end of TWAI configuration + +# +# UART configuration +# +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART configuration + +# +# RTCIO configuration +# +# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set +# end of RTCIO configuration + +# +# GPIO Configuration +# +# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set +# end of GPIO Configuration + +# +# GDMA Configuration +# +# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GDMA_ISR_IRAM_SAFE is not set +# end of GDMA Configuration +# end of Driver configurations + +# +# eFuse Bit Manager +# +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set +CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set +CONFIG_EFUSE_MAX_BLK_LEN=192 +# end of eFuse Bit Manager + +# +# ESP-TLS +# +CONFIG_ESP_TLS_USING_MBEDTLS=y +# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set +# CONFIG_ESP_TLS_SERVER is not set +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set +# CONFIG_ESP_TLS_PSK_VERIFICATION is not set +# CONFIG_ESP_TLS_INSECURE is not set +# end of ESP-TLS + +# +# ESP32-specific +# +CONFIG_ESP32_REV_MIN_0=y +# CONFIG_ESP32_REV_MIN_1 is not set +# CONFIG_ESP32_REV_MIN_2 is not set +# CONFIG_ESP32_REV_MIN_3 is not set +CONFIG_ESP32_REV_MIN=0 +CONFIG_ESP32_DPORT_WORKAROUND=y +# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y +# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 +# CONFIG_ESP32_SPIRAM_SUPPORT is not set +# CONFIG_ESP32_TRAX is not set +CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 +# CONFIG_ESP32_ULP_COPROC_ENABLED is not set +CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0 +CONFIG_ESP32_DEBUG_OCDAWARE=y +CONFIG_ESP32_BROWNOUT_DET=y +CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_ESP32_BROWNOUT_DET_LVL=0 +CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y +# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set +CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y +# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 +CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 +CONFIG_ESP32_XTAL_FREQ_40=y +# CONFIG_ESP32_XTAL_FREQ_26 is not set +# CONFIG_ESP32_XTAL_FREQ_AUTO is not set +CONFIG_ESP32_XTAL_FREQ=40 +# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set +# CONFIG_ESP32_NO_BLOBS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set +# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set +CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5 +# end of ESP32-specific + +# +# ADC-Calibration +# +CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y +CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y +CONFIG_ADC_CAL_LUT_ENABLE=y +# end of ADC-Calibration + +# +# Common ESP-related +# +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related + +# +# Ethernet +# +CONFIG_ETH_ENABLED=y +CONFIG_ETH_USE_ESP32_EMAC=y +CONFIG_ETH_PHY_INTERFACE_RMII=y +CONFIG_ETH_RMII_CLK_INPUT=y +# CONFIG_ETH_RMII_CLK_OUTPUT is not set +CONFIG_ETH_RMII_CLK_IN_GPIO=0 +CONFIG_ETH_DMA_BUFFER_SIZE=512 +CONFIG_ETH_DMA_RX_BUFFER_NUM=10 +CONFIG_ETH_DMA_TX_BUFFER_NUM=10 +CONFIG_ETH_USE_SPI_ETHERNET=y +# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set +# CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set +# CONFIG_ETH_USE_OPENETH is not set +# end of Ethernet + +# +# Event Loop Library +# +# CONFIG_ESP_EVENT_LOOP_PROFILING is not set +CONFIG_ESP_EVENT_POST_FROM_ISR=y +CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y +# end of Event Loop Library + +# +# GDB Stub +# +# end of GDB Stub + +# +# ESP HTTP client +# +CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y +# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y +# end of ESP HTTP client + +# +# HTTP Server +# +CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 +CONFIG_HTTPD_MAX_URI_LEN=512 +CONFIG_HTTPD_ERR_RESP_NO_DELAY=y +CONFIG_HTTPD_PURGE_BUF_LEN=32 +# CONFIG_HTTPD_LOG_PURGE_DATA is not set +# CONFIG_HTTPD_WS_SUPPORT is not set +# end of HTTP Server + +# +# ESP HTTPS OTA +# +# CONFIG_OTA_ALLOW_HTTP is not set +# end of ESP HTTPS OTA + +# +# ESP HTTPS server +# +# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set +# end of ESP HTTPS server + +# +# Hardware Settings +# + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 +# end of MAC Config + +# +# Sleep Config +# +CONFIG_ESP_SLEEP_POWER_DOWN_FLASH=y +CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y +# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set +# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set +# end of Sleep Config + +# +# RTC Clock Config +# +# end of RTC Clock Config +# end of Hardware Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1536 +CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y +CONFIG_ESP_IPC_ISR_ENABLE=y +# end of IPC (Inter-Processor Call) + +# +# LCD and Touch Panel +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + +# +# ESP NETIF Adapter +# +CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 +CONFIG_ESP_NETIF_TCPIP_LWIP=y +# CONFIG_ESP_NETIF_LOOPBACK is not set +CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y +# end of ESP NETIF Adapter + +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +CONFIG_ESP_PHY_REDUCE_TX_POWER=y +# end of PHY + +# +# Power Management +# +# CONFIG_PM_ENABLE is not set +# end of Power Management + +# +# ESP System Settings +# +# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set +CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y +# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set + +# +# Memory protection +# +# end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=7168 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_MULTIPLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +CONFIG_ESP_INT_WDT=y +CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 +CONFIG_ESP_INT_WDT_CHECK_CPU1=y +CONFIG_ESP_TASK_WDT=y +# CONFIG_ESP_TASK_WDT_PANIC is not set +CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y +# end of ESP System Settings + +# +# High resolution timer (esp_timer) +# +# CONFIG_ESP_TIMER_PROFILING is not set +CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y +CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y +CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set +# CONFIG_ESP_TIMER_IMPL_FRC2 is not set +CONFIG_ESP_TIMER_IMPL_TG0_LAC=y +# end of High resolution timer (esp_timer) + +# +# Wi-Fi +# +CONFIG_ESP32_WIFI_ENABLED=y +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_CSI_ENABLED is not set +CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP32_WIFI_TX_BA_WIN=6 +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_NVS_ENABLED=y +CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP32_WIFI_IRAM_OPT=y +CONFIG_ESP32_WIFI_RX_IRAM_OPT=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y +# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set +# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y +# end of Wi-Fi + +# +# Core dump +# +# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set +# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set +CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y +# end of Core dump + +# +# FAT Filesystem support +# +# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set +CONFIG_FATFS_CODEPAGE_437=y +# CONFIG_FATFS_CODEPAGE_720 is not set +# CONFIG_FATFS_CODEPAGE_737 is not set +# CONFIG_FATFS_CODEPAGE_771 is not set +# CONFIG_FATFS_CODEPAGE_775 is not set +# CONFIG_FATFS_CODEPAGE_850 is not set +# CONFIG_FATFS_CODEPAGE_852 is not set +# CONFIG_FATFS_CODEPAGE_855 is not set +# CONFIG_FATFS_CODEPAGE_857 is not set +# CONFIG_FATFS_CODEPAGE_860 is not set +# CONFIG_FATFS_CODEPAGE_861 is not set +# CONFIG_FATFS_CODEPAGE_862 is not set +# CONFIG_FATFS_CODEPAGE_863 is not set +# CONFIG_FATFS_CODEPAGE_864 is not set +# CONFIG_FATFS_CODEPAGE_865 is not set +# CONFIG_FATFS_CODEPAGE_866 is not set +# CONFIG_FATFS_CODEPAGE_869 is not set +# CONFIG_FATFS_CODEPAGE_932 is not set +# CONFIG_FATFS_CODEPAGE_936 is not set +# CONFIG_FATFS_CODEPAGE_949 is not set +# CONFIG_FATFS_CODEPAGE_950 is not set +CONFIG_FATFS_CODEPAGE=437 +CONFIG_FATFS_LFN_NONE=y +# CONFIG_FATFS_LFN_HEAP is not set +# CONFIG_FATFS_LFN_STACK is not set +CONFIG_FATFS_FS_LOCK=0 +CONFIG_FATFS_TIMEOUT_MS=10000 +CONFIG_FATFS_PER_FILE_CACHE=y +# CONFIG_FATFS_USE_FASTSEEK is not set +# end of FAT Filesystem support + +# +# Modbus configuration +# +CONFIG_FMB_COMM_MODE_TCP_EN=y +CONFIG_FMB_TCP_PORT_DEFAULT=502 +CONFIG_FMB_TCP_PORT_MAX_CONN=5 +CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20 +CONFIG_FMB_COMM_MODE_RTU_EN=y +CONFIG_FMB_COMM_MODE_ASCII_EN=y +CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150 +CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200 +CONFIG_FMB_QUEUE_LENGTH=20 +CONFIG_FMB_PORT_TASK_STACK_SIZE=4096 +CONFIG_FMB_SERIAL_BUF_SIZE=256 +CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8 +CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000 +CONFIG_FMB_PORT_TASK_PRIO=10 +# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y +# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set +CONFIG_FMB_PORT_TASK_AFFINITY=0x0 +CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y +CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233 +CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 +CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 +CONFIG_FMB_CONTROLLER_STACK_SIZE=4096 +CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 +# CONFIG_FMB_TIMER_PORT_ENABLED is not set +CONFIG_FMB_TIMER_GROUP=0 +CONFIG_FMB_TIMER_INDEX=0 +CONFIG_FMB_MASTER_TIMER_GROUP=0 +CONFIG_FMB_MASTER_TIMER_INDEX=0 +# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set +# end of Modbus configuration + +# +# FreeRTOS +# +# CONFIG_FREERTOS_UNICORE is not set +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y +CONFIG_FREERTOS_CORETIMER_0=y +# CONFIG_FREERTOS_CORETIMER_1 is not set +CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y +CONFIG_FREERTOS_HZ=100 +CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 +CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y +# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set +# CONFIG_FREERTOS_ASSERT_DISABLE is not set +CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +# CONFIG_FREERTOS_LEGACY_HOOKS is not set +CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 +CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 +CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 +CONFIG_FREERTOS_USE_TRACE_FACILITY=y +CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y +# CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID is not set +# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set +CONFIG_FREERTOS_DEBUG_OCDAWARE=y +# CONFIG_FREERTOS_FPU_IN_ISR is not set +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set +# end of FreeRTOS + +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + +# +# Heap memory debugging +# +CONFIG_HEAP_POISONING_DISABLED=y +# CONFIG_HEAP_POISONING_LIGHT is not set +# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set +CONFIG_HEAP_TRACING_OFF=y +# CONFIG_HEAP_TRACING_STANDALONE is not set +# CONFIG_HEAP_TRACING_TOHOST is not set +# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set +# end of Heap memory debugging + +# +# jsmn +# +# CONFIG_JSMN_PARENT_LINKS is not set +# CONFIG_JSMN_STRICT is not set +# end of jsmn + +# +# libsodium +# +# end of libsodium + +# +# Log output +# +# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set +# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set +# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set +CONFIG_LOG_DEFAULT_LEVEL_INFO=y +# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set +# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set +CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 +CONFIG_LOG_COLORS=y +CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y +# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set +# end of Log output + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set +CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y +# CONFIG_LWIP_L2_TO_L3_COPY is not set +# CONFIG_LWIP_IRAM_OPTIMIZATION is not set +CONFIG_LWIP_TIMERS_ONDEMAND=y +CONFIG_LWIP_MAX_SOCKETS=10 +# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set +# CONFIG_LWIP_SO_LINGER is not set +CONFIG_LWIP_SO_REUSE=y +CONFIG_LWIP_SO_REUSE_RXTOALL=y +# CONFIG_LWIP_SO_RCVBUF is not set +# CONFIG_LWIP_NETBUF_RECVINFO is not set +CONFIG_LWIP_IP4_FRAG=y +CONFIG_LWIP_IP6_FRAG=y +# CONFIG_LWIP_IP4_REASSEMBLY is not set +# CONFIG_LWIP_IP6_REASSEMBLY is not set +# CONFIG_LWIP_IP_FORWARD is not set +# CONFIG_LWIP_STATS is not set +# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set +CONFIG_LWIP_ESP_GRATUITOUS_ARP=y +CONFIG_LWIP_GARP_TMR_INTERVAL=60 +CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 +CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y +# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y +# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 + +# +# DHCP server +# +CONFIG_LWIP_DHCPS=y +CONFIG_LWIP_DHCPS_LEASE_UNIT=60 +CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 +# end of DHCP server + +# CONFIG_LWIP_AUTOIP is not set +CONFIG_LWIP_IPV6=y +# CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set +CONFIG_LWIP_NETIF_LOOPBACK=y +CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 + +# +# TCP +# +CONFIG_LWIP_MAX_ACTIVE_TCP=16 +CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y +CONFIG_LWIP_TCP_MAXRTX=12 +CONFIG_LWIP_TCP_SYNMAXRTX=12 +CONFIG_LWIP_TCP_MSS=1440 +CONFIG_LWIP_TCP_TMR_INTERVAL=250 +CONFIG_LWIP_TCP_MSL=60000 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 +CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 +CONFIG_LWIP_TCP_QUEUE_OOSEQ=y +# CONFIG_LWIP_TCP_SACK_OUT is not set +# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set +CONFIG_LWIP_TCP_OVERSIZE_MSS=y +# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set +CONFIG_LWIP_TCP_RTO_TIME=1500 +# end of TCP + +# +# UDP +# +CONFIG_LWIP_MAX_UDP_PCBS=16 +CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 +# end of UDP + +# +# Checksums +# +# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set +# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set +CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y +# end of Checksums + +CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 +# CONFIG_LWIP_SLIP_SUPPORT is not set + +# +# ICMP +# +CONFIG_LWIP_ICMP=y +# CONFIG_LWIP_MULTICAST_PING is not set +# CONFIG_LWIP_BROADCAST_PING is not set +# end of ICMP + +# +# LWIP RAW API +# +CONFIG_LWIP_MAX_RAW_PCBS=16 +# end of LWIP RAW API + +# +# SNTP +# +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set +CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 +# end of SNTP + +CONFIG_LWIP_ESP_LWIP_ASSERT=y + +# +# Hooks +# +# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set +CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y +# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y +# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set +CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set +# end of Hooks + +# CONFIG_LWIP_DEBUG is not set +# end of LWIP + +# +# mbedTLS +# +CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y +# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set +# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set +CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y +CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 +# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +# CONFIG_MBEDTLS_DEBUG is not set + +# +# mbedTLS v2.28.x related +# +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +# end of mbedTLS v2.28.x related + +# +# Certificate Bundle +# +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set +# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +# end of Certificate Bundle + +# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set +# CONFIG_MBEDTLS_CMAC_C is not set +CONFIG_MBEDTLS_HARDWARE_AES=y +CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_HARDWARE_SHA=y +CONFIG_MBEDTLS_ROM_MD5=y +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set +CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set +CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y +CONFIG_MBEDTLS_SHA512_C=y +CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y +# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set +# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set +# CONFIG_MBEDTLS_TLS_DISABLED is not set +CONFIG_MBEDTLS_TLS_SERVER=y +CONFIG_MBEDTLS_TLS_CLIENT=y +CONFIG_MBEDTLS_TLS_ENABLED=y + +# +# TLS Key Exchange Methods +# +# CONFIG_MBEDTLS_PSK_MODES is not set +CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y +# end of TLS Key Exchange Methods + +CONFIG_MBEDTLS_SSL_RENEGOTIATION=y +# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set +CONFIG_MBEDTLS_SSL_PROTO_TLS1=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set +# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set +CONFIG_MBEDTLS_SSL_ALPN=y +CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y +CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y +CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y +CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y + +# +# Symmetric Ciphers +# +CONFIG_MBEDTLS_AES_C=y +# CONFIG_MBEDTLS_CAMELLIA_C is not set +# CONFIG_MBEDTLS_DES_C is not set +CONFIG_MBEDTLS_RC4_DISABLED=y +# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set +# CONFIG_MBEDTLS_RC4_ENABLED is not set +# CONFIG_MBEDTLS_BLOWFISH_C is not set +# CONFIG_MBEDTLS_XTEA_C is not set +CONFIG_MBEDTLS_CCM_C=y +CONFIG_MBEDTLS_GCM_C=y +# CONFIG_MBEDTLS_NIST_KW_C is not set +# end of Symmetric Ciphers + +# CONFIG_MBEDTLS_RIPEMD160_C is not set + +# +# Certificates +# +CONFIG_MBEDTLS_PEM_PARSE_C=y +CONFIG_MBEDTLS_PEM_WRITE_C=y +CONFIG_MBEDTLS_X509_CRL_PARSE_C=y +CONFIG_MBEDTLS_X509_CSR_PARSE_C=y +# end of Certificates + +CONFIG_MBEDTLS_ECP_C=y +CONFIG_MBEDTLS_ECDH_C=y +CONFIG_MBEDTLS_ECDSA_C=y +# CONFIG_MBEDTLS_ECJPAKE_C is not set +CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y +CONFIG_MBEDTLS_ECP_NIST_OPTIM=y +# CONFIG_MBEDTLS_POLY1305_C is not set +# CONFIG_MBEDTLS_CHACHA20_C is not set +# CONFIG_MBEDTLS_HKDF_C is not set +# CONFIG_MBEDTLS_THREADING_C is not set +# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set +# CONFIG_MBEDTLS_SECURITY_RISKS is not set +# end of mbedTLS + +# +# mDNS +# +CONFIG_MDNS_MAX_SERVICES=10 +CONFIG_MDNS_TASK_PRIORITY=1 +CONFIG_MDNS_TASK_STACK_SIZE=4096 +# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_MDNS_TASK_AFFINITY_CPU0=y +# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set +CONFIG_MDNS_TASK_AFFINITY=0x0 +CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 +# CONFIG_MDNS_STRICT_MODE is not set +CONFIG_MDNS_TIMER_PERIOD_MS=100 +# CONFIG_MDNS_NETWORKING_SOCKET is not set +CONFIG_MDNS_MULTIPLE_INSTANCE=y +# end of mDNS + +# +# ESP-MQTT Configurations +# +CONFIG_MQTT_PROTOCOL_311=y +CONFIG_MQTT_TRANSPORT_SSL=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y +# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set +# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set +# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set +# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set +# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set +# CONFIG_MQTT_CUSTOM_OUTBOX is not set +# end of ESP-MQTT Configurations + +# +# Newlib +# +CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set +CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y +# CONFIG_NEWLIB_NANO_FORMAT is not set +# end of Newlib + +# +# NVS +# +# end of NVS + +# +# OpenSSL +# +# CONFIG_OPENSSL_DEBUG is not set +CONFIG_OPENSSL_ERROR_STACK=y +# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set +CONFIG_OPENSSL_ASSERT_EXIT=y +# end of OpenSSL + +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set +# end of OpenThread + +# +# PThreads +# +CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_PTHREAD_STACK_MIN=768 +CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y +# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set +# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set +CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" +# end of PThreads + +# +# SPI Flash driver +# +# CONFIG_SPI_FLASH_VERIFY_WRITE is not set +# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set +CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set +# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set +# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set +# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set +CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y +CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 +CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 +CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set +# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set + +# +# Auto-detect flash chips +# +CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set +# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set +# end of Auto-detect flash chips + +CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y +# end of SPI Flash driver + +# +# SPIFFS Configuration +# +CONFIG_SPIFFS_MAX_PARTITIONS=3 + +# +# SPIFFS Cache Configuration +# +CONFIG_SPIFFS_CACHE=y +CONFIG_SPIFFS_CACHE_WR=y +# CONFIG_SPIFFS_CACHE_STATS is not set +# end of SPIFFS Cache Configuration + +CONFIG_SPIFFS_PAGE_CHECK=y +CONFIG_SPIFFS_GC_MAX_RUNS=10 +# CONFIG_SPIFFS_GC_STATS is not set +CONFIG_SPIFFS_PAGE_SIZE=256 +CONFIG_SPIFFS_OBJ_NAME_LEN=32 +# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set +CONFIG_SPIFFS_USE_MAGIC=y +CONFIG_SPIFFS_USE_MAGIC_LENGTH=y +CONFIG_SPIFFS_META_LENGTH=4 +CONFIG_SPIFFS_USE_MTIME=y + +# +# Debug Configuration +# +# CONFIG_SPIFFS_DBG is not set +# CONFIG_SPIFFS_API_DBG is not set +# CONFIG_SPIFFS_GC_DBG is not set +# CONFIG_SPIFFS_CACHE_DBG is not set +# CONFIG_SPIFFS_CHECK_DBG is not set +# CONFIG_SPIFFS_TEST_VISUALISATION is not set +# end of Debug Configuration +# end of SPIFFS Configuration + +# +# TCP Transport +# + +# +# Websocket +# +CONFIG_WS_TRANSPORT=y +CONFIG_WS_BUFFER_SIZE=1024 +# end of Websocket +# end of TCP Transport + +# +# Unity unit testing library +# +CONFIG_UNITY_ENABLE_FLOAT=y +CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set +# CONFIG_UNITY_ENABLE_COLOR is not set +CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y +# CONFIG_UNITY_ENABLE_FIXTURE is not set +# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set +# end of Unity unit testing library + +# +# Virtual file system +# +CONFIG_VFS_SUPPORT_IO=y +CONFIG_VFS_SUPPORT_DIR=y +CONFIG_VFS_SUPPORT_SELECT=y +CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_VFS_SUPPORT_TERMIOS=y + +# +# Host File System I/O (Semihosting) +# +CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 +# end of Host File System I/O (Semihosting) +# end of Virtual file system + +# +# Wear Levelling +# +# CONFIG_WL_SECTOR_SIZE_512 is not set +CONFIG_WL_SECTOR_SIZE_4096=y +CONFIG_WL_SECTOR_SIZE=4096 +# end of Wear Levelling + +# +# Wi-Fi Provisioning Manager +# +CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 +CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +# end of Wi-Fi Provisioning Manager + +# +# Supplicant +# +CONFIG_WPA_MBEDTLS_CRYPTO=y +# CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set +# CONFIG_WPA_DEBUG_PRINT is not set +# CONFIG_WPA_TESTING_OPTIONS is not set +# CONFIG_WPA_WPS_STRICT is not set +# CONFIG_WPA_11KV_SUPPORT is not set +# end of Supplicant +# end of Component config + +# +# Compatibility options +# +# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set +# end of Compatibility options + +# Deprecated options for backward compatibility +CONFIG_TOOLPREFIX="xtensa-esp32-elf-" +# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set +CONFIG_LOG_BOOTLOADER_LEVEL_WARN=y +# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set +CONFIG_LOG_BOOTLOADER_LEVEL=2 +# CONFIG_APP_ROLLBACK_ENABLE is not set +# CONFIG_FLASH_ENCRYPTION_ENABLED is not set +# CONFIG_FLASHMODE_QIO is not set +# CONFIG_FLASHMODE_QOUT is not set +CONFIG_FLASHMODE_DIO=y +# CONFIG_FLASHMODE_DOUT is not set +# CONFIG_MONITOR_BAUD_9600B is not set +# CONFIG_MONITOR_BAUD_57600B is not set +CONFIG_MONITOR_BAUD_115200B=y +# CONFIG_MONITOR_BAUD_230400B is not set +# CONFIG_MONITOR_BAUD_921600B is not set +# CONFIG_MONITOR_BAUD_2MB is not set +# CONFIG_MONITOR_BAUD_OTHER is not set +CONFIG_MONITOR_BAUD_OTHER_VAL=115200 +CONFIG_MONITOR_BAUD=115200 +CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set +CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y +# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set +CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_CXX_EXCEPTIONS is not set +CONFIG_STACK_CHECK_NONE=y +# CONFIG_STACK_CHECK_NORM is not set +# CONFIG_STACK_CHECK_STRONG is not set +# CONFIG_STACK_CHECK_ALL is not set +# CONFIG_WARN_WRITE_STRINGS is not set +# CONFIG_DISABLE_GCC8_WARNINGS is not set +# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set +CONFIG_ESP32_APPTRACE_DEST_NONE=y +CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y +CONFIG_ADC2_DISABLE_DAC=y +# CONFIG_SPIRAM_SUPPORT is not set +CONFIG_TRACEMEM_RESERVE_DRAM=0x0 +# CONFIG_ULP_COPROC_ENABLED is not set +CONFIG_ULP_COPROC_RESERVE_MEM=0 +CONFIG_BROWNOUT_DET=y +CONFIG_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_BROWNOUT_DET_LVL=0 +CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set +# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set +# CONFIG_NO_BLOBS is not set +# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_EVENT_LOOP_PROFILING is not set +CONFIG_POST_EVENTS_FROM_ISR=y +CONFIG_POST_EVENTS_FROM_IRAM_ISR=y +# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set +CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y +CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 +CONFIG_ESP_SYSTEM_PD_FLASH=y +# CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND is not set +CONFIG_IPC_TASK_STACK_SIZE=1536 +CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP32_PHY_MAX_TX_POWER=20 +CONFIG_ESP32_REDUCE_PHY_TX_POWER=y +# CONFIG_ESP32S2_PANIC_PRINT_HALT is not set +CONFIG_ESP32S2_PANIC_PRINT_REBOOT=y +# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP32S2_PANIC_GDBSTUB is not set +CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_MAIN_TASK_STACK_SIZE=7168 +CONFIG_CONSOLE_UART_DEFAULT=y +# CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_UART_NONE is not set +CONFIG_CONSOLE_UART=y +CONFIG_CONSOLE_UART_NUM=0 +CONFIG_CONSOLE_UART_BAUDRATE=115200 +CONFIG_INT_WDT=y +CONFIG_INT_WDT_TIMEOUT_MS=300 +CONFIG_INT_WDT_CHECK_CPU1=y +CONFIG_TASK_WDT=y +# CONFIG_TASK_WDT_PANIC is not set +CONFIG_TASK_WDT_TIMEOUT_S=5 +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set +CONFIG_TIMER_TASK_STACK_SIZE=3584 +# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set +CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y +CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150 +CONFIG_MB_MASTER_DELAY_MS_CONVERT=200 +CONFIG_MB_QUEUE_LENGTH=20 +CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096 +CONFIG_MB_SERIAL_BUF_SIZE=256 +CONFIG_MB_SERIAL_TASK_PRIO=10 +CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y +CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233 +CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20 +CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 +CONFIG_MB_CONTROLLER_STACK_SIZE=4096 +CONFIG_MB_EVENT_QUEUE_TIMEOUT=20 +# CONFIG_MB_TIMER_PORT_ENABLED is not set +CONFIG_MB_TIMER_GROUP=0 +CONFIG_MB_TIMER_INDEX=0 +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +CONFIG_TIMER_TASK_PRIORITY=1 +CONFIG_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_TIMER_QUEUE_LENGTH=10 +# CONFIG_L2_TO_L3_COPY is not set +# CONFIG_USE_ONLY_LWIP_SELECT is not set +CONFIG_ESP_GRATUITOUS_ARP=y +CONFIG_GARP_TMR_INTERVAL=60 +CONFIG_TCPIP_RECVMBOX_SIZE=32 +CONFIG_TCP_MAXRTX=12 +CONFIG_TCP_SYNMAXRTX=12 +CONFIG_TCP_MSS=1440 +CONFIG_TCP_MSL=60000 +CONFIG_TCP_SND_BUF_DEFAULT=5744 +CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_RECVMBOX_SIZE=6 +CONFIG_TCP_QUEUE_OOSEQ=y +# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set +CONFIG_TCP_OVERSIZE_MSS=y +# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_TCP_OVERSIZE_DISABLE is not set +CONFIG_UDP_RECVMBOX_SIZE=6 +CONFIG_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_PPP_SUPPORT is not set +CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_ESP32_PTHREAD_STACK_MIN=768 +CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set +CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" +CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set +CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_SUPPORT_TERMIOS=y +CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 +# End of deprecated options diff --git a/part5_i2c_com/lab1_i2c_tools/sdkconfig.defaults b/part5_i2c_com/lab1_i2c_tools/sdkconfig.defaults new file mode 100644 index 0000000..2d3564c --- /dev/null +++ b/part5_i2c_com/lab1_i2c_tools/sdkconfig.defaults @@ -0,0 +1,17 @@ +# Reduce bootloader log verbosity +CONFIG_BOOTLOADER_LOG_LEVEL_WARN=y +CONFIG_BOOTLOADER_LOG_LEVEL=2 + +# Increase main task stack size +CONFIG_ESP_MAIN_TASK_STACK_SIZE=7168 + +# Enable filesystem +CONFIG_PARTITION_TABLE_CUSTOM=y +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions_example.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions_example.csv" + +# Enable FreeRTOS stats formatting functions, needed for 'tasks' command +CONFIG_FREERTOS_USE_TRACE_FACILITY=y +CONFIG_FREERTOS_USE_STATS_FORMATTING_FUNCTIONS=y + +CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y diff --git a/part5_i2c_com/lab2-1_temp_sensor/.gitignore b/part5_i2c_com/lab2-1_temp_sensor/.gitignore new file mode 100644 index 0000000..6148ca0 --- /dev/null +++ b/part5_i2c_com/lab2-1_temp_sensor/.gitignore @@ -0,0 +1,10 @@ + +# Configuration files +sdkconfig +sdkconfig.old + +# Production folder +build/ + +# HTML documentation +html_doc/ \ No newline at end of file diff --git a/part5_i2c_com/lab2-1_temp_sensor/CMakeLists.txt b/part5_i2c_com/lab2-1_temp_sensor/CMakeLists.txt new file mode 100644 index 0000000..25a750c --- /dev/null +++ b/part5_i2c_com/lab2-1_temp_sensor/CMakeLists.txt @@ -0,0 +1,6 @@ +# The following lines of boilerplate have to be in your project's +# CMakeLists in this exact order for cmake to work correctly +cmake_minimum_required(VERSION 3.5) + +include($ENV{IDF_PATH}/tools/cmake/project.cmake) +project(main) diff --git a/part5_i2c_com/lab2-1_temp_sensor/Doxyfile b/part5_i2c_com/lab2-1_temp_sensor/Doxyfile new file mode 100644 index 0000000..97fbf60 --- /dev/null +++ b/part5_i2c_com/lab2-1_temp_sensor/Doxyfile @@ -0,0 +1,2494 @@ +# Doxyfile 1.8.13 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "My Project" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 0. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 0 + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf. + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.idl \ + *.ddl \ + *.odl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.cs \ + *.d \ + *.php \ + *.php4 \ + *.php5 \ + *.phtml \ + *.inc \ + *.m \ + *.markdown \ + *.md \ + *.mm \ + *.dox \ + *.py \ + *.pyw \ + *.f90 \ + *.f95 \ + *.f03 \ + *.f08 \ + *.f \ + *.for \ + *.tcl \ + *.vhd \ + *.vhdl \ + *.ucf \ + *.qsf + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse-libclang=ON option for CMake. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html_doc + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /